A3.
Please follow the following procedure to start up.
[Reference]
How to set the debugger
1. Select [Option] and [Tool registry] on the project manager.
2. Select [Add to…] of Tool registry dialog and open the tool specify dialog.
Tool specify
Tool file name
Factor at the execution
Folder at the execution
Title to indicate at menu
Title to indicate at tool chip
Title to indicate at status bar
Browse
Cancel
3. Specify an exe file of the debugger at Tool file name. (For example: C:\NW78K9\Id78K0sa.exe)
4. Specify the project file name created by the debugger at Factor at the execution. (For example: C:\NW78K9\test.prj)Note1
5. Input [NW78Kx] to [Title to indicate at menu] [Title to indicate at tool chip] [Title to indicate at status bar]. (For example: NW78K9)
6. Press OK to entry, a new icon appears on the project manager.
Note1: This is not a project file name created at the project manager.
(For the project manager of the debugger, see the manual of NW-78Kx.)
NW78Kx is not applied to long name (9 characters or more). To save the project file, save by the directory named by 8 characters or less.
Note2: When execute re-build in the load module file (*.lim/ink) -read status by the debugger, a message [F303: Command completion error] is displayed.
[Workaround] Once complete the debugger. |
