|
|
 |
Q5. When read the load module file (LNK) by the command line, a message [Device information area is fulfilled (refer to –B option at the start up)] appears at the command window.
In a like manner, when read the load module file by the file menu, following message appears.
Load error
L C:\WORK\C_PROGRAM.LNK
|
A5.
512Kbyte is spared for the debug information area as default, by specifying -B [the debug information area] for the option to start up P-ND78K0/Win is taken as a solution. Example:C:\WPT78K0\BIN\WPT78K0.EXE -XC -B1024
Details Make C source debug effective (-XC). Set the debug information area as 1024Kbytes (-B1024). Set the source file directory of the debug subject to be in the current directory (the same directory where WPT78K0.EXE is) (default).
|
| Q4. Partner ７８Ｋ０/Ｗｉｎ can’t start correctly |
A4.
If the version of Windows95 is not OSR2 or later, you need to go to Home page of Microsoft to upgrade RS232C driver. If the extensions using RS232C for the internal modem, etc. exist, you need to confirm that the COM debugger use are not confront with. (If so, the competitors can not be indicated by [System property]. If IRQ, DMMF, etc. make confrontations, competitors are indicated. Even if four drivers using COM1 exist, it is normal for the system.)
|
Q3. Make a Read of LNK file, but why C source can not be indicated?
|
A3.
As the option for WPT78K0.EXE start up, specify [-XC] and [-SD source file directory name].
|
Q2. We want to check the input level from Target Board to Asmis PORT.
|
A2.
In break status, execute SR command by the command window to update the value of SFR register.
|
Q1. When read the LNK file, which is compiled by two or more source files, why one module file is indicated only?
|
A1.
For the version E1.3F or later, which are on public at present, they have been reworked.
Go to download screen→
|
|
