| ■Features |
■FL-PR5 |
■FL-PR4 |
| Dimensions |
147X95X30mm (with protrusion) |
200X115X46mm (with protrusion) |
| Weight |
230g (approximately) |
420g (approximately) |
| Subject devices |
FLASH micro controller with single power supply and dual power supply. (For dual power supply, support by a request-based) |
FLASH micro controller with single power supply and dual power supply. |
| Host I/F |
USB2.0, USB1.1, Serial |
USB1.1, Serial, Parallel |
| External control I/F |
Existing |
Nothing |
| Target I/F |
CSI, CSI-H/S, UART, IIC, PORT |
CSI, CSI-H/S, UART, IIC, PORT |
| VDD supply from programmer |
1.5-5V(Maximum rated currents 200mA)(Internal switchable) |
2.1-5V(Maximum rated currents 200mA)(Internal switchable) |
| CLK supply from programmer |
Able (select 1MHz-20MHz) |
Able (select 1MHz-20MHz) |
| ROM code |
16MB at the maximum (8-way split, intended) |
2MB at the maximum (2-way split) |
| Device unique information |
Parameter file (*.prm) for PG-FP5
Multiple read-able |
Parameter file (*.prm) for PG-FP4
Single read-able |
| Security setting |
Set-able by security command |
Set-able by security command |
| Programming independently |
Operational by special key |
Operational by special key |
| Target Cable |
14-pins,16-pins cable |
10-pins, 16-pins cable |
| Power supply |
Special AC adapter (15V, 1A) |
Special AC adapter (15V, 1A) |
| Control software |
Specific control software for FP5 |
Specific control software for FP4 |