|
 |
| ■Parameter files for FL-PR （FlashPro) |
| For FL-PR3, FL-PR4, FP-LITE, Parameter files download information |
| Parameter files for FL-PR2, FL-PR3 |
 |
|
| Download way |
Read the following precautions, and download the parameter file (for PG-FP3) from “NEC Electronics Development tool download”. |
| Precautions |
For FL-PR2, Handshake-writing and EEPROM writing are not supported. |
For FL-PR2 Firmware (product version) V2.1(A1.,A2.,A3.) or V2.50x(-), upgrade is required. Please click and go to “FL-PR2 Upgrade”.
|
 Go to Upgrade
|
For FL-PR3 Firmware (product version) from V3.04b(H9.) to V3.05d(K15.), upgrade is required. Please click and go to “FL-PR3 Upgrade”.
|
Go to Upgrade
|
If your FL-PR3 has the product version G7. or former, please arrange for the upgrade through the listed distributors of “HOW TO BUY”.
|
| For the version of Firmware and GUI, HELP of the control software allows to check. |
| Parameter files for FL-PR4 |
|
|
| Download way |
Read the following precautions, and download the parameter file (for PG-FP3) from “NEC Electronics Development tool download”. |
| Precautions |
For FL-PR4 GUI software V2.04, Firmware V1.21, upgrade by “FL-PR4 Upgrade”.
|
Go to Upgrade
|
File name is provided by its device name. For information, even if the file is not accompanied with “Y”, the file is applied to the product with Y and the product without Y. |
Parameter files for FP-LITE, FL-PR2
|
|
|
| Download way |
Read the following precautions, and download the parameter file (for PG-FP3) from “NEC Electronics Development tool download”. |
| Precautions |
For the subject devices, please refer to Here.
|
File name is provided by its device name. For information, even if the file is not accompanied with “Y”, the file is applied to the product with Y and the product without Y. |
|
